Technical Documents
![250x_250_Enverge_Banner-01 (1) Enverge Banner](https://growthzonecmsprodeastus.azureedge.net/sites/1658/2024/06/250x_250_Enverge_Banner-01-1.jpg)
![BASF Ad - 1 BASF Ad](https://growthzonecmsprodeastus.azureedge.net/sites/1658/2024/06/BASF-Ad-1.jpg)
The SPFA Technical Committees have developed a library of documents for SPF contractors as well as architects, specifiers, builders, and code officials.
There are two types of SPFA documents:
- SPFA TechDocs are detailed documents that describe specific applications of SPF and are useful to both SPF contractors and design professionals.
- SPFA TechTips are short articles for installers.
SPFA Members can access the documents through the Member InfoHub. Non-members may purchase the TechDocs from the SPFA Store.
General
Technical Documents
- SPFA-118 Moisture Vapor Transmission:Â Guidance on moisture vapor transmission through SPF including tables and sample calculations.
- SPFA-119 Glossary of Terms:Â Definitions for SPF industry terminology
- SPFA-121 Spray Polyurethane Foam Estimating Reference Guide:Â Guidance for contractors for estimating SPF roofing and insulation applications
- SPFA-137 High-Pressure Spray Foam Equipment Guidelines:  Overview of equipment needed for safe application of high-pressure SPF materials.
- SPFA-143 Primers: Why, When and How to Use Them:Â Guidance on selection of primers for different SPF substrates and applications.
- SPFA-144 Coating Equipment Guidelines:Â Advice on equipment needed for application of single and plural component systems used for primers, fire protective coatings and roof covers.
- SPFA-145 Surface Texture of Spray Polyurethane Foam:Â Â How to define surface texture of SPF insulation and roofing foams. prior to coating applications.
- SPFA-155Â Low-Pressure Spray Foam Equipment Guidelines:Â Â Overview of equipment needed for safe application of low-pressure SPF materials.
Tech Tips
- G-1. Gun Cleaners
- G-2. Maintaining Temperatures
- G-3. Flush Pots
- G-4. Maintaining Pressure and Ratio
- G-5. On Ratio?
- G-6. Determining Lift Thickness
- G-7. Foam Switchover
- G-8. Rig Readiness Inspection Checklist
- G-9. Short- and Long-Term Rig Shutdown
- G-10. Insulating Spray Foam Equipment
- G-11. Fire Suppression for Spray Rigs
Insulation
Technical Documents
- SPFA-112 Spray Polyurethane Foam for Residential Building Envelope Insulation and Air Seal: This document discusses the application of SPF insulation for residential applications.Â
- SPFA-126 Thermal and Ignition Barriers for the SPF Industry:Â Defines the requirements for both thermal and ignition barriers, and the tests currently accepted to qualify these materials. Â
- SPFA-134 Guideline for Insulating Metal Buildings with Spray Applied Polyurethane Foam:Â Guidance on substrate preparation, vapor retarder applications, thermal barrier applications and application techniques for metal buildings.Â
- SPFA-140 Spray Polyurethane Foam for Exterior Subgrade Thermal and Moisture Protection:Â Guidance for evaluation, preparation and installation of closed-cell SPF on the exterior side of below-grade walls.
- SPFA-141 Spray Polyurethane Foam for Cathedralized Ceilings and Unvented (Conditioned) Attics:  Design and installation guidance for SPF insulation directly beneath sloped roof decks above cathedralized ceilings and unvented/conditioned attics.
- SPFA-146 Spray Polyurethane Foam for Hybrid Insulation Systems - Part 1: Climate Zones 1-3:Â Best practices for installing SPF insulation and air sealing in combination with air and moisture permeable (fibrous) insulations to create a hybrid insulation system in warmer climates.
- SPFA-147 Spray Polyurethane Foam for Hybrid Insulation Systems - Part 2: Climate Zones 4-7:Â Â Best practices for installing SPF insulation and air sealing in combination with air and moisture permeable (fibrous) insulations to create a hybrid insulation system in colder climates.
- SPFA-148 SPF Insulation Installation Certificate:Â Â Sample form for compliance with building code requirements for insulation levels and fire safety.
- SPFA-149 Architectural Specification for High-Pressure Spray Polyurethane Foam Insulation (CSI-Model Spec):Â A sample specification for SPF insulation in CSI-Model format.
- SPFA-152 Spray Polyurethane Foam Insulation for the Interior of Basement and Crawlspace Walls:Â Guidance for design and installation of SPF on the inside of crawlspace and basement walls and foundation.
- SPFA-153 Spray Polyurethane Foam Insulation for Below-Slab Applications:Â Â Best practices for installation of closed-cell SPF below concrete slabs.
Tech Tips
- I-1. Picture Framing
- I-2. Exothermic Temperatures in SPF
- I-3. SPF and Open-Combustion Appliances
- I-4. SPF and CPVC Piping
- I-5. SPF Adhesion to Engineered Wood
- I-6. SPF on Wiring and Plastic Pipes
- I-7. Installing High-Lift Closed-Cell SPF
Roofing
Technical Documents
- SPFA-102 A Guide for Selection of Elastomeric Protective Coatings Over Sprayed Polyurethane Foam:Â A guide for elastomeric coatings for SPF roofing systems.
- SPFA-104 Spray Polyurethane Foam Systems for New and Remedial Roofing:Â Â Best practices for design and insulation of SPF roofing systems.
- SPFA-104 Roofing Details - File location of AutoCAD DXF files for all details shown in SPFA-104.
- SPFA-107 Spray Polyurethane Foam Blisters:Â Guidance on the definition, causes and repair of blisters in SPF roofing systems.
- SPFA-110 Spray Polyurethane Foam Aggregate Systems for New and Remedial Roofing:Â Best practices for design and installation of aggregate over SPF roofing systems.
- SPFA-122 The Renewal of Spray Polyurethane Foam and Coating Roof Systems: Guidance for  preparation and procedures for renewal of an existing SPF roof system.
- SPFA-127 Maintenance Manual for Spray Polyurethane Foam Roof Systems:Â A guide for building owners and facilities managers to help maintain SPF roof systems.
- SPFA-130 Spray Polyurethane Foam Roofing:Â Marketing Brochure targeting benefits of SPF roofing systems for low-slope roofs.
- SPFA-138 Guideline for Roof Assembly Evaluation for Spray Polyurethane Foam Roof System:Â Provides substrate evaluation criteria for recover, re-roof, and tear-off operations.
- SPFA-139 Recommendations for Repair of Spray Polyurethane Foam Roof Systems due to Hail and Wind Driven Damage:Â How to evaluate and repair a SPF roof system after hail or wind damage.
- SPFA-142 A Guideline for Securing Roofing Components with SPF Adhesives:Â A guide for the use of single and dual component roofing adhesives.
- SPFA-150 Photo-Voltaic Systems and SPF Roof Systems:Â An overview of PV systems and how they interface with and affect the performance of SPF Roofs.
Tech Tips
- R-1. Cold Weather Roof Coating
- R-2. Reducing Roof Weight with SPF
- R-3. Coating Reversion
- R-4. Spraying Smooth Roof Surfaces
- R-5. Scarifying SPF Roof Surfaces
- R-6. SPF Roof Systems over Skylights
- R-7. SPF Roof Systems over Wires and Conduit
Specialty
Technical Documents
- SPFA-103 Spray Polyurethane Foam Insulation Systems for Metal Service Vessels Operating Between -35oC (-30oF) and 93oC (200oF):Â Â Best practices for the installation of closed-cell SPF on metal tanks and piping.
- SPFA-111 Spray Polyurethane Foam Systems for Cold Storage Facilities Operating Between - 40oC and + 10oC (- 40oF and + 50oF):Â Â Guidance for the design and application of SPF for cold storage buildings, focusing on proper moisture management.Â
- SPFA-157 Polyurethane Foam for Concrete Lifting (Slab Jacking);Â Best practices document for concrete lifting.